Tool Bar - Stack Fold (Subsoil)
Stack Fold (Subsoil) The KMC 1700 Series Stack Fold Tool Bars are designed and proven for extra heavy-duty field uses that utilize deep till sub soil shanks. These bars are designed for row components in the row.
Key Features 
  • The Series I Stack Fold Tool Bar utilizes double bar solid welded construction with 7x7x3/8 main tool bar and 7x4x3/8 front truss bar tied together with welded lap joint braces.
  • The folding super structure is straddle mounted above the main tool bar and utilizes a solid welded center anchor for the wing pivot member and the adjustable hex leveling bar.
  • The hex leveling bar adjust the angle of the wing to the center section.
  • When in the field position, the front truss bar of the wing and center section are locked together and a wide span with a pin and cradle design that locks the wing to the center section virtually eliminating the possibility of tool bar failure at the break point.
  • Eight Row hitches are Cat III and IIIN. 12 row hitches are Cat III and IV.
  • All hydraulic cylinders and plumbing are standard equipment, and hydraulic cylinders are 5x24 for more than adequate force for folding and supporting heavy wings and row components.
Benefits 
  • Implement folds to a compact unit for transport.
  • Row components are maintained in an up right position during transport preventing excessive wear on linkages of row components.

Available Models

Model #

 Description Length Center Wing Weight
16-082-182 8 Row (36-40) 301 in 153 in 74 in 4,443 lbs
16-082-187 12 Row (30) 355 in 183 in 86 in 5,524 lbs
16-082-180 12 Row (36-38) 439 in 225 in 107 in 5,644 lbs

Options:
  • [1] Pair Screw type gauge wheels
  • [2] Pair Screw type gauge wheels

See brochures for additional specifications Return to Tool Bar Page
Kelley Manufacturing Co.
P.O. Box 1467, 80 Vernon Drive
Tifton, GA  31793		 Telephone: 229-382-9393 Toll Free: 800-444-5449
FAX: 229-382-5259
E-mail: info@kelleymfg.com